Freecom Technologies Computer Drive XS 30 User Manual

USER MANUAL  
HARD DRIVE XS 3.0  
EXTERNAL HARD DRIVE / 3.5" / USB 3.0  
Rev. 942  
 
Table of Contents  
User manual  
EN  
General Information....................................................................................................page  
Precautionary measures ............................................................................................page  
Freecom Hard Drive XS 3.0 .......................................................................................page  
Saving Freecom data...................................................................................................page  
4
5
6
6
Chapter 1:  
Hardware Installation.........................................................................................................page  
7
7
Chapter ꢀ:  
Driver Installation ................................................................................................................page  
Chapter 3:  
Partitioning your Freecom Hard Drive XS 3.0 ...........................................................page  
8
© 2009 Freecom Technologies  
3
 
Freecom Hard Drive XS 3.0  
General Information  
EN  
The following hardware and software requirements must be fulfilled to ensure trouble-  
free operation.  
System requirements  
In order to use the Freecom Hard Drive XS 3.0, following components are needed:  
Intel Pentium III / AMD Duron 900 MHz or higher  
512 MB RAM or higher  
Available USB 3.0 port*  
Internet connection for online warranty registration and software updates and  
downloads  
Operating system: Windows XP, Windows Vista, Windows 7  
*
To achieve optimal performance from the Freecom Hard Drive XS 3.0 your PC should be equipped with an  
USB 3.0 port.  
 
General Information  
Precautionary measures  
EN  
To ensure that your Freecom Hard Drive XS 3.0 functions properly, please take note of  
the following precautions. If these are not followed, you may void your warranty and  
damage the Freecom Hard Drive XS 3.0.  
Safely remove the Freecom Hard Drive XS 3.0 via your operating system (the "unplug  
or eject hardware" option in the Windows taskbar) before disconnecting the USB cable  
or power cable and before switching off the device. Failing to do so may result in data  
loss.  
Do not drop the Freecom Hard Drive XS 3.0 or expose it to other kinds of sudden  
mechanical shocks as this may result in data loss and damage to the Freecom Hard  
Drive XS 3.0.  
Do not use the Freecom Hard Drive XS 3.0 when the ambient temperature is below  
10°C or above 35°C.  
If the Freecom Hard Drive XS 3.0 is moved from a cool environment to a warmer  
environment, please allow the drive to acclimatize to the ambient temperature  
before operating the device. Failing to do so may lead to condensation within the  
drive enclosure, which in turn may cause the drive to malfunction.  
Do not place liquids or drinks on the Freecom Hard Drive XS 3.0. When liquids are  
spilled and get in contact with the electronics within the drive enclosure, it will  
damage the drive and will cause the drive to malfunction.  
Do not use the Freecom Hard Drive XS 3.0 in a dusty environment. Dust inside the  
enclosure may damage the internal electronics and result in drive malfunction.  
Opening the Freecom Hard Drive XS 3.0 will void the warranty.  
Since USB 3.0 is backwards compatible with USB 1.1/2.0, the Freecom Hard Drive XS  
3.0canbeconnectedtoallUSBports. WhenconnectedtoaUSB1.1/2.0port, however,  
the performance (data transfer rate) of the Freecom Hard Drive XS 3.0 will be much  
lower than when the drive is connected to a USB 3.0 port.  
Only use the power adapter that was supplied with the Freecom Hard Drive XS 3.0.  
 
Freecom Hard Drive XS 3.0  
Freecom Hard Drive XS 3.0  
EN  
The hi-speed data transfer through the USB 3.0 interface makes it ideally suitable for  
data-storage, file sharing, backup, archiving, audio playback and all applications that  
need fast file access.  
Foryourconvenience,theFreecomHardDriveXS3.0hasbeenpartitioned(1partition)and  
pre-formatted(FAT32filesystem).TheFAT32formatensuresmaximuminterchangeability  
of the Freecom Hard Drive XS 3.0 between different computers. Should you choose to  
formattheFreecomHardDriveXS3.0inanotherfilesystem(e.g.NTFS),pleasebeawareof  
possible problems when connecting the Freecom Hard Drive XS 3.0 to another computer  
than the one you used for formatting.  
Saving Freecom data  
The user manuals and complementary software (when applicable) are pre-loaded  
onto the hard drive. We recommend that you save these files to your computer ("My  
Documents"/"Freecom"), toalwayshaveabackupofthesefilesincaseyou(accidentally)  
reformat the drive or delete these files from the drive.  
Saving these files from the external hard drive to your computer is easy:  
1. Click on the button "Save Freecom files".  
2. All provided data on the hard drive will be saved to the folder "Freecom" in "My  
Documents".  
6
 
Hardware Installation  
Chapter 1: Hardware Installation  
EN  
1
1. Connect the interface cable to the Freecom Hard Drive XS  
3.0.  
2. ConnectthecableofthepowersupplytotheFreecomHard  
Drive XS 3.0 and the power supply itself to the socket.  
3. Connect the interface cable to the interface port of your  
computer.  
Safely remove the Freecom Hard Drive XS 3.0 via your operating system  
(the "unplug or eject hardware" option in the Windows taskbar) before  
disconnecting the USB cable or power cable and before switching off the  
device. Failing to do so may result in data loss.  
Chapter ꢀ: Driver Installation  
Under Windows XP / Vista and Windows 7 a separate Freecom driver is not required.  
The drivers will be installed automatically by the operating system after plugging in  
the Freecom Hard Drive XS 3.0 into the USB port of the computer.  
7
 
Freecom Hard Drive XS 3.0  
Chapter 3: Partitioning your Freecom Hard Drive XS 3.0  
EN  
3
3.1 General information  
Your Freecom Hard Drive XS 3.0 was partitioned and formatted to provide you with the  
maximumavailablecapacityandcompatibility. FAT32waschosenasfilesystemtoassure  
that you will be able to read your files on any PC. It is recommended not to change the  
current configuration of your Freecom Hard Drive XS 3.0.  
For some users another file system might fit better for their needs. This manual describes  
current limitations of most common file systems and Instructions to enable you to adapt  
the Freecom Hard Drive XS 3.0 to your needs.  
3.ꢀ File System features  
Please refer to the tables below for an overview:  
File systems supported by different operating systems  
File system  
FAT  
FAT3ꢀ  
NTFS  
HFS+  
Operating system  
Windows XP/Vista/7  
Mac OS X  
yes  
yes  
yes  
yes  
yes  
no  
yes  
(only read)  
yes  
Maximum size of a partition  
File system  
FAT  
FAT3ꢀ  
NTFS  
HFS+  
Operating system  
Windows XP/Vista/7  
Mac OS X 10.1.x  
Mac OS X 10.2.x  
Mac OS X 10.3.x  
Mac OS X 10.4.x  
Mac OS X 10.5.x  
Mac OS X 10.6.x  
4 GB*  
32 GB  
16 TB  
-
-
-
-
-
-
-
128 GB  
-
-
-
-
-
-
2 TB  
128 GB  
8 TB  
( -> 128 GB)  
( -> 128 GB)  
( -> 128 GB)  
( -> 128 GB)  
16 TB  
16 TB  
16 TB  
16 TB  
*
FAT partitions larger than 2 GB can only be administrated by Windows XP/Vista/7.  
 
Partitioning your Freecom Hard Drive XS 3.0  
Example for different partitions with different file systems on one Freecom  
Hard Drive XS 3.0  
EN  
3
File system  
Total  
NTFS  
FAT3ꢀ  
size of  
Freecom Hard Drive XS 3.0  
1 TB  
970 GB  
30 GB  
Note: On NTFS formatted hard disks can only be written under Windows  
XP / Vista / 7. Under MacOSX data can only be read.  
The example above is a good solution for Windows XP / Vista / 7 users who sometimes  
exchange data with Macs.  
For storing the data under Windows XP / Vista / 7 both partitions can be used. As the  
NTFS file system can only be read by Mac data to be used on these operating systems  
must be stored on the FAT32 partition.  
Please follow the steps below to adapt the Hard Drive XS 3.0 for your needs.  
3.3 Partitioning your Freecom Hard Drive XS 3.0 under Windows XP/  
Vista/7  
3.3.1 Deleting a partition on the Freecom Hard Drive XS 3.0 under Windows  
XP/Vista/7  
1. Click with the right mouse button on the "My Computer" icon on your desktop.  
2. Select the option "Manage".  
3. Select the option "Storage" -> "Disk Management".  
4. Choose your external Freecom Hard Drive XS 3.0 and right-click on the partition.  
5. Select "Delete Partition" and confirm by clicking on "Yes". The partition will be  
deleted now.  
3.3.ꢀ Creating a partition on the Freecom Hard Drive XS 3.0 under Windows  
XP/Vista/7  
The following steps will guide you through the process of creating partitions on your  
Freecom Hard Drive XS 3.0. After this procedure your Freecom Hard Drive XS 3.0 will be  
ready for use and it will be allocated a drive letter.  
1. Click with the right mouse button on the "My Computer" icon on your desktop.  
2. Select the option "Manage".  
3. Select the option "Storage" -> "Disk Management".  
4. Choose the hard disk, which is "unallocated". Ensure that the entire drive is  
"unallocated".  
 
Freecom Hard Drive XS 3.0  
EN  
3
5. Click with the right mouse button on the "unallocated" area and select the option  
"New Partition". The "New Partition Wizard" opens. Click on "Next".  
10  
 
Partitioning your Freecom Hard Drive XS 3.0  
6. Select "Primary partition" and click on "Next".  
EN  
3
7. Now you can adjust the size of your partition. Click on "Next" if only one partition is to  
be created. See next chapter (Creating two or more partitions on the Freecom Hard  
Drive XS 3.0 under Windows XP/Vista/7) how to create more than one partition.  
8. Assign a drive letter to your hard disk. Normally you can use the default options. Click  
on "Next".  
11  
 
Freecom Hard Drive XS 3.0  
9. Selecttheformattingoption"Formatthispartitionwiththefollowingsettings".Choose  
either "FAT32" or "NTFS", the "Allocation unit size" should remain on "Default". Finally  
select "Perform a quick format" and click on "Next".  
EN  
3
10. Click on "Finish" to complete the partitioning of your Freecom Hard Drive XS 3.0. Your  
Freecom Hard Drive XS 3.0 will be formatted now and is ready-to-use afterwards.  
1ꢀ  
 
Partitioning your Freecom Hard Drive XS 3.0  
3.3.3 Creating two or more partitions on the Freecom Hard Drive XS 3.0 under  
Windows XP/Vista/7  
EN  
3
1. Repeat the steps from the previous chapter (Creating a partition on the Freecom  
Hard Drive XS 3.0 under Windows XP/Vista/7) for creating the first partition.  
2. Click with the right mouse button on the "My Computer" icon on your desktop.  
3. Select the option "Manage".  
4. Select the option "Storage" -> "Disk Management".  
5. Right-click on the unallocated space of your Freecom Hard Drive XS 3.0 and select  
the option "New partition". The "New Partition Wizard"opens. Click on "Next".  
6. Select "Extended partition" and click on "Next".  
7. Now you can adjust the size of your partition. Enter the size and click on "Next".  
13  
 
Freecom Hard Drive XS 3.0  
8. Click on "Finish" to create the "Extended partition". The unallocated space now  
changed to "Free space".  
EN  
3
1ꢁ  
 
Partitioning your Freecom Hard Drive XS 3.0  
9. Right-clickon"FreeSpace"andselect"NewLogicalDrive".The"NewPartitionWizard"  
opens. Click on "Next".  
EN  
3
10. "Logical drive" is already selected. Click on "Next".  
11. Specify the partition size and click on "Next".  
12. Assign a drive letter and click on "Next".  
13. Selecttheformattingoption"Formatthispartitionwiththefollowingsettings".Choose  
either "FAT32" or "NTFS", the "Allocation unit size" should remain on "Default". Finally  
select "Perform a quick format" and click on "Next".  
14. Click on "Finish" to complete partitioning. Your partition will be formatted now and  
is ready-to-use.  
1ꢂ  
 
WARRANTY  
(valid in Europe/Turkey only)  
We thank you for purchasing this Freecom product and hope you will enjoy using it.  
In order to avoid unnecessary inconvenience on your part, we suggest reading the quick  
install guide, instruction manual and any additional electronic and or printed manuals.When  
problems occur we have a database with Frequently Asked Questions (FAQ) on our Freecom  
Your Guarantee  
All Freecom products come with unlimited technical phone and web support. By this  
Guarantee, Freecom warrants their products to be free from defects in material and work-  
manship for a period listed below from the date of its original purchase. If during this period  
of guarantee the product proves defective due to improper materials or workmanship,  
Freecom will, without charge for labour or parts, at its sole discretion, repair or replace the  
product or its defective parts upon the terms and conditions set out below.  
Conditions  
This guarantee will be granted only when the original invoice or sales receipt (indicating  
the date of purchase, product and serial number) is presented together with the defective  
product and a Freecom RMA number received from the Freecom Website or given by a  
Freecom Service Center. Freecom reserves the right to refuse the free-of-charge guarantee  
services when the date of purchase of the product cannot be proven. This guarantee will  
not apply if the RMA number is missing, the serial number on the product has been altered,  
removed or made illegible.  
This guarantee covers only the hardware components packaged with the product. This  
guarantee covers none of the following: (a) any consumable supplied with the product, such  
as media or batteries; (b) damage to or loss of any software programs, data or removable  
storage media; (c) any damage resulting from adaptations, changes or adjustments, which  
may have been made to the product, without the prior written consent of Freecom; (d) att-  
empted repair by any party other than authorized by Freecom and (e) accidents, lightning,  
water, fire or any other such cause beyond the reasonable control of Freecom.  
With respect to all services provided, Freecom is not responsible for any damage to or loss  
of any programs, data or other information stored on any media or any part of any product  
serviced. Freecom is not liable for the consequence of business loss in case of system failure.  
Be sure to exclude all parts not covered by this guarantee prior to returning the product to  
Freecom. Freecom is not liable for any loss or damage to these items. If during the repair  
of the product the contents of the hard drive are altered, deleted or in any way modified,  
Freecom is not liable whatsoever.  
Repair parts and replacement products will be provided on an exchange basis and will be  
either new, equivalent to new or reconditioned. All replaced parts and products become  
the property of Freecom The period of guarantee for any product or part repaired or re-  
placed in warranty shall be the balance of the original guarantee. Repairs or replacements  
on product or parts out of warranty carry 6 (six) months guarantee.  
1
YEAR  
WARRANTY  
 

Electro Voice Microphone N D257 User Manual
Fluke Home Safety Product Ti20 User Manual
Fluke Power Supply 43B User Manual
Foundations Baby Furniture 100 SS User Manual
Freecom Technologies Network Cables Dual Drive Network Center User Manual
FUNAI Flat Panel Television CIWL2606 User Manual
Gardena Trimmer THS 42 User Manual
Giant Bicycle GFR Series User Manual
Global Machinery Company Planer BFPCF User Manual
Global Machinery Company Saw MPS184M User Manual