WatchGuard Technologies Network Card V100 User Manual

®
WatchGuard  
V10, V60L, V60,  
V80, V100  
Hardware Guide  
Vclass 5.0  
 
VCCI Notice Class A ITE  
Firebox V10, V60L, V60, V80, V100 Hardware Guide  
iii  
 
Declaration of Conformity  
iv  
Vclass  
 
Firebox Limited Hardware Warranty  
This Limited Hardware Warranty (the “Warranty”) applies to the enclosed  
WatchGuard hardware product (the “Product”), not including any associated software  
which is licensed pursuant to a seperate end-user license agreement and warranty. BY  
USING THE PRODUCT, YOU AGREE TO THE TERMS HEREOF. If you do not agree  
to these terms, please return this package, along with proof of purchase, to the  
authorized dealer from which you purchased it for a full refund. WatchGuard  
Technologies, Inc. (”WatchGuard”) and you agree as follows:  
1. Limited Warranty. WatchGuard warrants that upon delivery and for one (1) year  
thereafter (the “Warranty Period”): (a) the Product will be free from material defects  
in materials and workmanship, and (b) the Product, when properly installed and used  
for its intended purpose and in its intended operating environment, will perform  
substantially in accordance with WatchGuard applicable specifications.  
This warranty does not apply to any Product that has been: (i) altered, repaired or  
modified by any party other than WatchGuard; or (ii) damaged or destroyed by  
accidents, power spikes or similar events or by any intentional, reckless or negligent  
acts or omissions of any party. You may have additional warranties with respect to the  
Product from the manufacturers of Product components. However, you agree not to  
look to WatchGuard for, and hereby release WatchGuard from any liability for,  
performance of, enforcement of, or damages or other relief on account of, any such  
warranties or any breach thereof.  
2. Remedies. If any Product does not comply with the WatchGuard warranties set forth  
in Section 1 above, WatchGuard will, at its option, either (a) repair the Product, or (b)  
replace the Product; provided, that you will be responsible for returning the Product to  
the place of purchase and for all costs of shipping and handling. Repair or replacement  
of the Product shall not extend the Warranty Period. Any Product, component, part or  
other item replaced by WatchGuard becomes the property of WatchGuard .  
WatchGuard shall not be responsible for return of or damage to any software,  
firmware, information or data contained in, stored on, or integrated with any returned  
Products.  
3. Disclaimer and Release. THE WARRANTIES, OBLIGATIONS AND LIABILITIES  
OF WATCHGUARD, AND YOUR REMEDIES, SET FORTH IN PARAGRAPHS 1 AND  
2 ABOVE ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND YOU HEREBY  
WAIVE, DISCLAIM AND RELEASE ANY AND ALL OTHER WARRANTIES,  
OBLIGATIONS AND LIABILITIES OF WATCHGUARD AND ALL OTHER RIGHTS,  
CLAIMS AND REMEDIES YOU MAY HAVE AGAINST WATCHGUARD, EXPRESS  
OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO ANY  
NONCONFORMANCE OR DEFECT IN THE PRODUCT (INCLUDING, BUT NOT  
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE, ANY IMPLIED WARRANTY ARISING FROM  
COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE,  
ANY WARRANTY OF NONINFRINGEMENT, ANY WARRANTY OF  
UNINTERRUPTED OR ERROR-FREE OPERATION, ANY OBLIGATION,  
LIABILITY, RIGHT, CLAIM OR REMEDY IN TORT, WHETHER OR NOT ARISING  
FROM THE NEGLIGENCE (WHETHER ACTIVE, PASSIVE OR IMPUTED) OR  
FAULT OF WATCHGUARD OR FROM PRODUCT LIABILITY, STRICT LIABILITY  
OR OTHER THEORY, AND ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR  
REMEDY FOR LOSS OR DAMAGE TO, OR CAUSED BY OR CONTRIBUTED TO  
BY,THE PRODUCT).  
4. Limitation of Liability. WATCHGUARD TECHNOLOGIES’ LIABILITY (WHETHER  
ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE,  
PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR  
OTHER THEORY) WITH REGARD TO ANY PRODUCT WILL IN NO EVENT  
EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT. THIS  
SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED  
REMEDY. IN NO EVENT WILL WATCHGUARD TECHNOLOGIES BE LIABLE TO  
Firebox V10, V60L, V60, V80, V100 Hardware Guide  
v
 
YOU OR ANY THIRD PARTY (WHETHER ARISING IN CONTRACT (INCLUDING  
WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE  
AND STRICT LIABILITY AND FAULT) OR OTHER THEORY) FOR COST OF COVER  
OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES (INCLUDING WITHOUT LIMITATION LOSS OF PROFITS, BUSINESS,  
OR DATA) ARISING OUT OF OR IN CONNECTION WITH THIS WARRANTY OR  
THE USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF WATCHGUARD  
TECHNOLOGIES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES. THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF  
ANY AGREED REMEDY.  
5. Miscellaneous Provisions. This Warranty will be governed by the laws of the state of  
Washington, U.S.A., without reference to its choice of law rules. The provisions of the  
1980 United Nations Convention on Contracts for the International Sales of Goods, as  
amended, shall not apply. You agree not to directly or indirectly transfer the Product or  
associated documentation to any country to which such transfer would be prohibited by  
the U.S. Export laws and regulations. If any provision of this Warranty is found to be  
invalid or unenforceable, then the remainder shall have full force and effect and the  
invalid provision shall be modified or partially enforced to the maximum extent  
permitted by law to effectuate the purpose of this Warranty. This is the entire  
agreement between WatchGuard and you relating to the Product, and supersedes any  
prior purchase order, communications, advertising or representations concerning the  
Product AND BY USING THE PRODUCT YOU AGREE TO THESE TERMS. No  
change or modification of this Agreement will be valid unless it is in writing, and is  
signed by WatchGuard.  
Notice to Users  
Information in this guide is subject to change without notice. Companies, names, and  
data used in examples herein are fictitious unless otherwise noted. No part of this guide  
may be reproduced or transmitted in any form or by any means, electronic or  
mechanical, for any purpose, without the express written permission of WatchGuard  
Technologies, Inc.  
Copyright, Trademark, and Patent Information  
Copyright© 1998 - 2003 WatchGuard Technologies, Inc. All rights reserved.  
AppLock®, AppLock®/Web, Designing peace of mind®, Firebox®, Firebox® 1000,  
Firebox® 2500, Firebox® 4500, Firebox® II, Firebox® II Plus, Firebox® II  
FastVPN, Firebox® III, Firebox® SOHO, Firebox® SOHO 6, Firebox® SOHO 6tc,  
Firebox® SOHO|tc, Firebox® V100, Firebox® V80, Firebox® V60, Firebox V60L,  
Firebox® V10, LiveSecurity®, LockSolid®, RapidStream®, RapidCore®,  
ServerLock®, WatchGuard®, WatchGuard® Technologies, Inc., DVCP™ technology,,  
Enforcer/MUVPN™, FireChip™, HackAdmin™, HostWatch™, Make Security Your  
Strength™, RapidCare™, SchoolMate™, ServiceWatch™, Smart Security. Simply  
Done.™, Vcontroller™, VPNforce™ are either registered trademarks or trademarks of  
WatchGuard Technologies, Inc. in the United States and/or other countries.  
© Hi/fn, Inc. 1993, including one or more U.S. Patents: 4701745, 5016009,  
5126739, and 5146221 and other patents pending.  
Microsoft®, Internet Explorer®, Windows® 95, Windows® 98, Windows NT® and  
Windows® 2000 are either registered trademarks or trademarks of Microsoft  
Corporation in the United States and/or other countries.  
Netscape and Netscape Navigator are registered trademarks of Netscape  
Communications Corporation in the United States and other countries.  
vi  
Vclass  
 
RC2 Symmetric Block Cipher, RC4 Symmetric Stream Cipher, RC5 Symmetric Block  
Cipher, BSAFE, TIPEM, RSA Public Key Cryptosystem, MD, MD2, MD4, and MD5  
are either trademarks or registered trademarks of RSA Data Security, Inc. Certain  
materials herein are Copyright © 1992-1999 RSA Data Security, Inc. All rights  
reserved.  
RealNetworks, RealAudio, and RealVideo are either a registered trademark or  
trademark of RealNetworks, Inc. in the United States and/or other countries.  
Java and all Jave-based marks are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the United States and other countries. All right reserved.  
© 1995-1998 Eric Young (eay@cryptsoft). All rights reserved.  
© 1998-2000 The OpenSSL Project. All rights reserved. Redistribution and use in  
source and binary forms, with or without modification, are permitted provided that the  
following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of  
conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of  
conditions and the following disclaimer in the documentation and/or other materials  
provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display  
the following acknowledgment: "This product includes software developed by the  
OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"  
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or  
promote products derived from this software without prior written permission. For  
written permission, please contact [email protected].  
5. Products derived from this software may not be called "OpenSSL" nor may  
"OpenSSL" appear in their names without prior written permission of the OpenSSL  
Project.  
6. Redistributions of any form whatsoever must retain the following acknowledgment:  
"This product includes software developed by the OpenSSL Project for use in the  
OpenSSL Toolkit (http://www.openssl.org/)"  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY  
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE  
OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,  
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR  
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING  
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF  
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
This product includes cryptographic software written by Eric Young  
([email protected]). This product includes software written by Tim  
Hudson ([email protected]).  
© 1995-1998 Eric Young ([email protected])  
All rights reserved.  
This package is an SSL implementation written by Eric Young ([email protected]).  
The implementation was written so as to conform with Netscapes SSL.  
This library is free for commercial and non-commercial use as long as the following  
conditions are aheared to. The following conditions apply to all code found in this  
distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The  
SSL documentation included with this distribution is covered by the same copyright  
terms except that the holder is Tim Hudson ([email protected]).  
Copyright remains Eric Young's, and as such any Copyright notices in the code are not  
to be removed. If this package is used in a product, Eric Young should be given  
attribution as the author of the parts of the library used. This can be in the form of a  
Firebox V10, V60L, V60, V80, V100 Hardware Guide  
vii  
 
textual message at program startup or in documentation (online or textual) provided  
with the package. Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list of conditions  
and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of  
conditions and the following disclaimer in the documentation and/or other materials  
provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display  
the following acknowledgement: "This product includes cryptographic software written  
by Eric Young ([email protected])" The word 'cryptographic' can be left out if the  
routines from the library being used are not cryptographic related :-).  
4. If you include any Windows specific code (or a derivative thereof) from the apps  
directory (application code) you must include an acknowledgement: "This product  
includes software written by Tim Hudson ([email protected])"  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS  
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR  
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT  
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;  
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER  
CAUSED AND ON ANY THEORY OF LIABILITY,  
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING  
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF  
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The licence and distribution terms for any publicly available version or derivative of  
this code cannot be changed. i.e. this code cannot simply be copied and put under  
another distribution licence [including the GNU Public Licence.]  
All other trademarks or trade names mentioned herein, if any, are the property of their  
respective owners.  
Part No: 1194-000  
viii  
Vclass  
 
Contents  
Front and Back Views .......................................................3  
The Firebox V10 model ..................................................3  
The Firebox V60, V60L and V80 models .............................5  
The Firebox V100 model .................................................8  
Firebox V10, V60, V60L, V80, and V100 Components .......11  
Index  
.......................................................................13  
Firebox V10, V60L, V60, V80, V100 Hardware Guide  
ix  
 
x
Vclass  
 
CHAPTER 1  
Hardware  
Descriptions  
This chapter provides a visual tour of the external  
hardware features of the WatchGuard® Firebox® V10,  
V60, V80, and V100 security appliances, focusing on  
the buttons, LEDs, interfaces, ports. Please see the Fire-  
box Vclass User Guide for installation instructions.  
Package Contents  
Each appliance model is packaged with different con-  
tents, as described in this section.  
WatchGuard Firebox V10 security appliance  
One 12V 1.25A, power supply  
Two green, straight-through, 10/100 BaseT,  
Ethernet cables  
A CD containing the WatchGuard Vcontroller  
application software for use with three different  
operating systems: Windows 2000/XP, Solaris,  
Firebox V10, V60L, V60, V80, V100 Hardware Guide  
1
 
       
CHAPTER 1: Hardware Descriptions  
and Linux. The CD also provides electronic versions of  
the complete user documentation set.  
WatchGuard Firebox V60, V60L, and V80  
security appliance  
One power cord  
One red, crossover 10/100 BaseT Ethernet cable  
Three green, straight-through, 10/100 BaseT, Ethernet  
cables  
One console, RJ 45-to-RJ 45, serial cable and DB-9  
adapter  
One APC-manufactured, appliance-to-UPS device  
cable  
A CD containing the WatchGuard Vcontroller  
application software for use with three different  
operating systems: Windows 2000/XP, Solaris, and  
Linux. The CD also provides electronic versions of the  
complete user documentation set.  
Rack-mounting hardware. If you are mounting the  
appliance in a rack, note that Firebox V60L, V60, and  
V80 appliances are 1U high.  
WatchGuard Firebox V100 security  
appliance  
One power cord  
One red, crossover, 10/100 BaseT, Ethernet cable  
One green, straight-through, 10/100 BaseT, Ethernet  
cable  
Two optical, data cables  
One APC-manufactured, appliance-to-UPS device  
cable  
One console, RJ 45-to-RJ 45, serial cable and DB-9  
adapter  
A CD containing the WatchGuard Vcontroller  
application software for use with three different  
2
Vclass  
 
       
Front and Back Views  
operating systems: Windows 2000/XP, Solaris, and  
Linux. The CD also provides electronic versions of the  
complete user documentation set.  
Rack-mounting hardware. If you are mounting the  
appliance in a rack, note that the Firebox V100 is 1 U  
high.  
Front and Back Views  
The Firebox V10 model  
The front panel of a Firebox V10 appliance contains the  
indicators shown in the following illustration.  
Alarm  
Admin  
Ready  
Power  
The LEDs on the front panel are as follows:  
Power  
Illuminates when the appliance has been turned  
on.  
Ready  
Blinks when the appliance is powering up.  
Illuminates when the appliance is ready for  
network traffic.  
Firebox V10, V60L, V60, V80, V100 Hardware Guide  
3
 
         
CHAPTER 1: Hardware Descriptions  
Alarm  
Illuminates when certain alarms are triggered. For  
more information on alarms, see the Firebox Vclass  
User Guide.  
Admin  
Illuminates when a system administrator is  
connected to the appliance by means of the  
Vcontroller or the WatchGuard CLI.  
The back panel of a Firebox V10 appliance contains the  
interfaces and ports shown in the following illustration.  
1 (Public)  
0 (Private)  
Console  
Power  
0 (Private) and 1 (Public)  
Two Ethernet interfaces (RJ-45 connectors) labeled  
0 and 1, act as the primary data interfaces.  
Incorporated into each Ethernet interface are two  
indicator lights labeled 10 and 100. These LEDs  
indicate the speed of traffic being transmitted.  
Console  
A single RJ-45 interface permits a direct  
workstation-to-appliance connection. You can use  
the WatchGuard Command Line Interface (CLI) to  
configure and administer this appliance. For more  
information about this administrative option, see  
the CLI Guide.  
4
Vclass  
 
         
Front and Back Views  
Power Port  
This interface serves as the connection to a  
100VAC-to-240VAC (50/60Hz) source. Use the  
power cord supplied in the package to connect this  
appliance to a UPS device or to a power outlet. The  
power supply can auto-detect 110/220 voltage.  
NOTE  
Always connect the power cable to the power port on the  
back of the V10 before you connect it to the AC outlet.  
NOTE  
In the event of a power failure, this security appliance, if left  
connected to the power source, automatically restarts itself  
after electrical power has been restored. You do not have to  
unplug and then reconnect the appliance to the power source.  
The Firebox V60, V60L and V80 models  
The front panels of the Firebox V60, V60L, and V80 security  
appliances contain the features shown in the following  
illustration.  
Accelerated Ethernet  
Interfaces  
0 (Private)  
Console Interface  
1 (Public)  
Ready  
Admin  
Alarm  
2 (DMZ)  
3 (DMZ)  
Power LED  
100  
10 100  
10 100  
10 100  
10  
100  
10  
100  
10  
Ready  
Admin  
Alarm  
Power  
HA  
0
1
2
3
HA2  
HA1  
Console  
Reset  
Reset port  
High Availability  
Status LED  
High Availability  
(HA Interface)  
Accelerated Ethernet Interfaces  
Four accelerated, Ethernet interfaces (RJ-45  
connectors) labeled 0 (Private), 1 (Public), 2 (DMZ1),  
and 3 (DMZ2) act as the primary conduits through  
which passes all of the network data traffic.  
Incorporated into each interface are two indicator  
Firebox V10, V60L, V60, V80, V100 Hardware Guide  
5
 
       
CHAPTER 1: Hardware Descriptions  
lights labeled 10 and 100. These LEDs indicate the  
speed of traffic being transmitted.  
High Availability Status LED  
Indicates the current status of this appliance, if it is  
one of two connected as a high-availability system.  
If this is the primary appliance, and the light is on  
and steady, the system is functional, and this  
appliance is on-line. If this is the primary appliance  
and the LED is blinking, a failover has occurred  
and the secondary appliance is online.  
High Availability Interfaces  
Two Ethernet interfaces, labelled HA2 and HA1  
enable you to connect with a cross-over Ethernet  
cable to other High Availability-ready Firebox  
Vclass appliances for failover (backup) protection.  
Incorporated into the two high-availability  
Ethernet ports are two indicator lights labeled 10  
and 100. These LEDs indicate the speed traffic is  
transmitted.  
Console Interface  
A single RJ-45 interface, labeled Console, permits a  
direct workstation-to-appliance connection. You  
can use the WatchGuard Command Line Interface  
(CLI) to configure and administer this appliance.  
For more information about this administrative  
option, see the CLI Guide.  
Ready  
Blinks when the appliance is powering up.  
Illuminates when the appliance is ready for  
network traffic.  
Admin  
Illuminates when a system administrator is  
connected to the appliance by means of the  
Vcontroller or the WatchGuard CLI.  
6
Vclass  
 
         
Front and Back Views  
Alarm  
Illuminates when certain alarms are triggered. For  
more information on alarms, see the Firebox Vclass  
User Guide.  
Reset port  
This opening allows you to insert a straight pin or  
paperclip and press an internal reset switch that  
restarts the appliance.  
Power LED  
Illuminates when the appliance has been turned  
on.  
The back panel of a Firebox V60, V60L, or V80 contains the  
features shown in the following illustration.  
Power supply switch  
AC Power cord  
"UPS" port  
AC Power Cord  
Enables you to connect the appliance (using the  
supplied power cord) to a 100 to 240VAC (50/  
60Hz) power source.  
NOTE  
Do not connect Firebox Vclass appliance to a source of power  
that supplies the wrong voltage. Doing so will damage the  
appliance and void the warranty.  
Power Supply Switch  
Allows you to turn the appliance on or off.  
UPS Port  
Permits connection of the appliance to an  
Uninterruptable Power Supply (UPS). This type of  
connection enables UPS devices to notify the  
Firebox V10, V60L, V60, V80, V100 Hardware Guide  
7
 
             
CHAPTER 1: Hardware Descriptions  
appliance if the power goes out, prompting the  
appliance to shut itself down properly.  
UPS devices from American Power Company  
(APC) are currently supported by the Firebox  
Vclass power management firmware. Check the  
WatchGuard Web site (www.watchguard.com) for  
updated information on complete UPS support.  
NOTE  
In the event of a power failure, this security appliance, if left  
connected to the power source, will automatically restart  
itself after electrical power has been restored. You do not  
have to press either the Power button on the front or the  
power supply switch on the back of the appliance.  
The Firebox V100 model  
The front panel of the Firebox V100 security appliance con-  
tains the features shown in the following illustration.  
1 (Public)  
0 (Private)  
Console Interface  
Ready  
Rx  
Tx  
Rx  
Tx  
Admin  
Power LED  
Link  
Alarm  
Link  
100  
10  
100  
10  
Rx  
Tx  
Rx  
Tx  
Ready  
Admin  
Alarm  
Power  
Link  
Link  
HA2  
HA1  
Console  
Reset  
HA  
Reset port  
High Availability  
Status LED  
High Availability  
(HA Interface)  
Gigabit interfaces  
Two Gigabit Ethernet interfaces, labeled 0 and 1  
(corresponding to Private and Public), act as the  
primary conduits through which network traffic  
8
Vclass  
 
     
Front and Back Views  
passes. These interfaces are multi-mode, but they  
do not support 10/100 communications.  
On each side of the two Gigabit interfaces are three  
LEDs labeled RX, TX, and Link.  
The Link LED is lit when a connection is active.  
The RX LED blinks steadily when data packets are  
being received by the appliance.  
The TX LED blinks steadily when data packets are  
being transmitted.  
High Availability Status LED  
Indicates the current status of this appliance, if it is  
one of two connected as a high-availability system.  
If this is the primary appliance, and the light is on  
and steady, the system is functional, and this  
appliance is online. If this is the primary appliance  
and the LED is blinking, a failover has occurred  
and the secondary appliance is online.  
For more information on HA setup, see the Firebox  
Vclass User Guide.  
High Availability Interfaces  
Two Ethernet interfaces, labelled HA2 and HA1  
enable you to connect with a cross-over Ethernet  
cable to other High Availability-ready Firebox  
Vclass appliances for failover (backup) protection.  
Incorporated into the two high-availability  
Ethernet ports are two indicator lights labeled 10  
and 100. These LEDs indicate the speed traffic is  
transmitted.  
Console Interface  
A single RJ-45 interface, labelled Console, supports  
a direct workstation-to-appliance connection. You  
can use the WatchGuard Command Line Interface  
(CLI) to administer and test this appliance. To learn  
more about this administrative option, see the CLI  
Guide included on the installer CD.  
Firebox V10, V60L, V60, V80, V100 Hardware Guide  
9
 
     
CHAPTER 1: Hardware Descriptions  
Ready  
Blinks when the appliance is powering up or  
powering down. It is steadily lit when the  
appliance is ready for network traffic.  
Admin  
Illuminates when a user or system administrator is  
connected to the Firebox Vclass appliance by  
means of the Vcontroller or the WatchGuard CLI.  
Alarm  
Indicates when an alarm is activated. For more  
information on alarms, see the Firebox Vclass User  
Guide.  
Reset Port  
Allows you to insert a straight pin or paperclip and  
press an internal Reset switch that restarts the  
appliance. This is an alternative to unplugging and  
replugging the power cord.  
Power LED  
Indicates whether the appliance has been fully  
turned on and is ready for administration or use.  
The back panel of a Firebox V100 includes the features  
shown in the following illustration.l  
Power supply switch  
AC power cord  
"UPS" port  
NOTE  
Do not connect any Firebox Vclass appliance to a source of  
power that supplies the wrong voltage. Doing so will damage  
the appliance and void the warranty.  
10  
Vclass  
 
           
Firebox V10, V60, V60L, V80, and V100 Components  
AC Power Cord  
Enables you to connect the appliance (using the  
supplied power cord) to a 100 to 240VAC (50/  
60Hz) power source. The power supply can auto-  
detect 110/220 voltage.  
Power Supply Switch  
Allows you to turn the appliance on or off.  
UPS Port  
Allows you to use the RS-232 cable provided in the  
package to connect the appliance to an  
Uninterruptable Power Supply (UPS). This type of  
connection enables UPS devices to notify the  
appliance if the power goes out, prompting the  
appliance to shut itself down properly.  
UPS devices from American Power Company  
(APC) are currently supported by the Firebox  
Vclass power management firmware. Check the  
WatchGuard Web site (www.watchguard.com) for  
updated information on complete UPS support.  
NOTE  
In the event of a power failure, this security appliance, if left  
connected to the power source, will automatically restart  
itself after electrical power has been restored. You do not  
have to press either the Power button on the front or the  
power supply switch on the back of the appliance.  
Firebox V10, V60, V60L, V80, and V100  
Components  
Every appliance has three sets of components:  
RapidCore™ hardware ensemble  
A well-integrated chip set and memory system  
powers every Firebox Vclass appliance in its  
Firebox V10, V60L, V60, V80, V100 Hardware Guide  
11  
 
           
CHAPTER 1: Hardware Descriptions  
primary duties: protecting your network and  
efficiently managing all legitimate data streams.  
WatchGuard Firebox Vclass Operating System™ (OS)  
Every Firebox Vclass security appliance is  
preinstalled with the latest version of the Firebox  
Vclass Operating System–which is identified on  
the packaging by a version number. This operating  
system includes all the software resources that  
make the appliance fully functional.  
WatchGuard Firebox Vclass administrative client  
applications  
The WatchGuard Vcontroller (or the companion  
WatchGuard CPM client software) gives you full  
control of all the customizable operating system  
parameters, including basic system configurations,  
security policies, maintenance, and activity  
logging.  
If you already have one or more operational Firebox Vclass  
appliances in your network, you can shortcut the installa-  
tion and configuration process on a new factory-default  
appliance. First, export a complete configuration file from  
an operational appliance and then import it into the new  
appliance. After this is done, you can change a few key set-  
tings and have a fully functional appliance in location and  
ready for use. For more information, see Firebox Vclass User  
Guide.  
NOTE  
This manual refers to the accelerated data interfaces  
interchangeably as Private, Public, and (where available)  
DMZ or with the standard interface numbering (0, 1, etc.):  
0 = Private, 1 = Public, 2&3 = DMZ  
Where other interfaces are included (a second DMZ or High  
Availability), the corresponding interface numbering will be  
noted at that time.  
12  
Vclass  
 
     
Index  
LEDs  
Admin 4, 6, 10  
Alarm 4, 7, 10  
HA status 6, 9  
Power 3, 7, 10  
Ready 3, 6, 10  
A
AC power 7, 11  
Admin LED 4, 6, 10  
Alarm LED 4, 7, 10  
P
C
power interface 5  
Power LED 3, 7, 10  
Power switch 7, 11  
certification, FCC ii  
Console interface 4, 6, 9  
E
Ethernet interfaces  
RapidCore hardware ensemble 11  
Ready LED 3, 6, 10  
for Firebox V10 4  
for Firebox V100 8  
for Firebox V60 and V80 5  
Reset switch 7, 10  
F
FCC certification ii  
Firebox V10  
supported 8  
back panel 4  
Firebox Vclass 100 11  
V60, V60L, V80 7  
front panel 3  
package contents 1  
Firebox V100  
back panel 10  
V
package contents 2  
Firebox V60, V60L, V80  
back panel 7  
package contents 2  
Firebox Vclass Operating System 12  
Fireboxes  
components of 11  
W
WatchGuard Vcontroller 12  
H
HA interfaces 6, 9  
HA status LED 6, 9  
Firebox V10, V60L, V60, V80, V100 Hardware Guide  
13  
 
 

Technics CD Player SL PS840 User Manual
TERK Technologies Universal Remote LF RFB User Manual
Thermador Cooktop PRD486GDHU User Manual
Toshiba Camera Accessories JK H01A User Manual
Toshiba DVD Player SD4300 User Manual
Toshiba Personal Computer A135 S2286 User Manual
TP Link Network Router TL WDR4900 User Manual
UltraViolet Devices Indoor Furnishings UVA User Manual
Vision Fitness Home Gym ST780 User Manual
Vizio Projection Television M3D651SV User Manual