LST Smoke Alarm OP 12001 User Manual

Optical Smoke Detector

OP-12001

• Addressable conventional technology

• Individual detector addressing by

means of optional address module

• Optional connection of remote

indicator

• Extremely ﬂat design

• Sealed electronics

Description

The Optical Smoke Detector OP-12001 uses the scatte- the measurement system, this is indicated by a yellow

red light principle and was developed for the detection ﬂashing of the multicoloured status LED.

of smoke particles in a wide range of ﬁre detection ap-

plications. The modern design of the sensing chamber Addressable conventional technology is used for alarm

allows to reliably evaluate the characteristics of ﬁre.

transmission to the ﬁre detection control panel. By

means of the optional Address Module NG60-1, each

Intelligent evaluation algorithms compensate for the detector can be addressed individually, thus allowing to

contamination of the optical measurement system, display the detector address, as well as an assigned

thus keeping the response sensitivity of the detector element text, on a suitable ﬁre detection control panel.

constant for a long time. In this way, false alarms can

be avoided to a great extent. If the contamination can The detector can be attached to various bases and it

not be compensated any further, or if a fault occurs in can be protected against theft.

Speciﬁcations

Operating voltage

Current consumption

Ambient temperature

Relative humidity

Dimensions ø × H

Colour

Supply through the detector line voltage

typ. 65µA (quiescent)

-40°C to +70°C (no condensation or icing)

0 – 98% (no condensation)

100 × 31 (mm)

white

Weight

75g

Approval

VdS G204039

Order number

Order name

241060

Optical Smoke Detector/Conv./ORBIS/Apo OP-12001

Building Safety. Building Security.

OP-12001_DBL_LST_EN_0804.PDF • PAGE 1